MiLAN MIL-RCM16A Spezifikationen PDF herunterladen (Seite 83)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

Make sure Liftgate platform is open and resting on the ground before perform-

ing the following step.

WARNING

To prevent damage when installing valve cartridges & coils, torque valve

cartridge nut to 30 lbs.-in. max.

CAUTION

2. The “D” solenoid valve (FIG. 78-2) may be

stuck in the “open” position. Remove the “D”

solenoid valve (FIG. 83-1). Next, check

the valve cartridge as follows. Push on

the plunger in the valve by inserting small

screwdriver in the open end (FIG. 83-2).

If the plunger does not move with a smooth,

spring-loaded action (approximately 1/8”)

(FIG. 83-1), replace the valve cartridge.

TYPICAL SOLENOID VALVE

REMOVED & DISASSEMBLED

FIG. 83-1

COIL

VALVE

CARTRIDGE

NUT

CHECKING VALVE CARTRIDGE

FIG. 83-2

VALVE

CARTRIDGE

1/8”

3. Reinstall “D” solenoid valve (if good)

(FIG. 83-1) or a replacement. Torque

valve cartridge to 30 lbs.-ft. and hex

nut to 30 lbs.-in.

1 2 ... 78 79 80 81 82 83 84 85 86

Keine Kommentare

MiLAN MIL-RCM16A Spezifikationen Seite 83