MiLAN MIL-RCM16A Spezifikationen PDF herunterladen (Seite 23)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

CLOSING CYLINDER REPLACEMENT

1. UNFOLD the platform. Lower the

platform (DOWN) to comfortable

height for work. Upper pin must be

lower than the bottom of the column

(see FIG. 23-1).

2. Disconnect the hydraulic hose from

lower end of cylinder (FIG. 23-2).

Plug hose to prevent spills.

3. Remove the lower roll pin from inside

coupling (FIG. 23-2) and then

remove lower pin.

4. Remove the upper roll pin (FIG. 23-

2) from the runner and then remove

the upper pin.

5. Remove cylinder from runner

(FIG. 23-2).

6. Place replacement cylinder in the

correct position as shown in FIG. 23-

7. Install upper pin (FIG. 23-2) and

roll pin in upper end of cylinder and

runner.

8. Install lower pin (FIG. 23-2) and

roll pin in lower end of cylinder

and inside coupling.

9. Reconnect hydraulic hose to

cylinder (FIG. 23-2).

FIG. 23-2

ROLL PIN

RUNNER

HYDRAULIC HOSE

ROLL PIN

UPPER PIN

LOWER PIN

INSIDE

COUPLING

REPLACING PARTS

FIG. 23-1

UPPER PIN

(CLOSING

CYLINDER)

COLUMN

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

MiLAN MIL-RCM16A Spezifikationen Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein MiLAN MIL-RCM16A