MiLAN MIL-RCM16A Spezifikationen PDF herunterladen (Seite 66)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PLATFORM WILL NOT FOLD - Continued

TROUBLESHOOTING

“E” VALVE

(3-WAY)

Make sure Liftgate platform is open and resting on the ground before perform-

ing the following step.

WARNING

To prevent damage when installing valve cartridges & coils, torque valve

cartridge nut to 30 lbs.-in. max.

CAUTION

4. The “E” solenoid valve (FIGS. 66-1

and 66-2) may be stuck in the “open”

position. Remove the “E” solenoid valve

(FIG. 63-1). Next, check the valve cartridge

as follows. Push on the plunger in the

valve by inserting small screwdriver in the

open end (FIG. 63-2). If the plunger does

not move with a smooth, spring-loaded

action (approximately 1/8”) (FIG. 63-2),

replace the valve cartridge.

TYPICAL SOLENOID VALVES

(PUMP IS SHOWN FROM POWER DOWN

UNIT WITH HOSES)

FIG. 66-1

TYPICAL SOLENOID VALVES

(PUMP IS SHOWN FROM GRAVITY DOWN

UNIT WITH STEEL LINES)

FIG. 66-2

“E” VALVE

(3-WAY)

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 85 86

Keine Kommentare

MiLAN MIL-RCM16A Spezifikationen Seite 66